Products
Available Alloys for Round, Flat, Shaped Wire, and Rod
All Mill Products Conform to ASTM Specifications as Applicable
|
WHEELER INDUSTRIAL CORPORATION
|
||
|
ALLOY DESCRIPTION AND COMMERCIAL DESIGNATION
|
COPPER DEVELOPMENT ASSOCIATION NUMBER
|
MAJOR ELEMENTS NOMINAL PERCENTAGES COMPOSITION
|
| COPPER CLADDED STEEL |
C1005/C1006
|
40% CONDUCTIVITY |
| DUMET |
42 ALLOY
|
22% COPPER CLADDED |
| MAGNESIUM COPPER |
N/A
|
CU MG 0.2 |
| MAGNESIUM COPPER |
N/A
|
CU MG 0.5 |
| ELECTROLYTIC TOUGH PITCH COPPER |
CDA C11000
|
CU 99.90 |
| OXYGEN FREE COPPER |
CDA C10100
|
CU 99.99 |
| OXYGEN FREE COPPER |
CDA C10200
|
CU 99.95 |
| OXYGEN FREE SILVER BEARING COPPER |
CDA C10700
|
CU 99.95 AG .085 |
| PHOSPHORUS DEOXIDIZED COPPER (High Residual Phosphorus) |
CDA C12200
|
CU MIN 99.90 P NOM .02 MIN IN. 015 MAX .040 |
| TELLURIUM BEARING COPPER |
CDA C14500
|
CU 99.90 TE.40-.60 |
| ZIRCONIUM COPPER C150 |
CDA C15000
|
CU MIN 99.80 ZR NOM .15 MIN .10 MAX .20 |
| CADMIUM COPPER |
CDA C16200
|
CU REM CD .7-1.2 FE .02 |
| CADMIUM COPPER |
CDA C16500
|
CU 98.6% CA 8% SN 6% |
| BERYLLIUM COPPER ALLOY 165 |
CDA C17000
|
CU REM BE 1.60-1.79 |
| BERYLLIUM COPPER ALLOY 25 |
CDA C17200
|
CU REM BE 1.80-2.00 |
| LEADED BERYLLIUM COPPER ALLOY |
CDA C17300
|
CU REM BE 1.80-2.00 PB .20-.60 |
| LOW BERYLLIUM COPPER ALLOY |
CDA C17410
|
CU REM BE .15-.50 CO .35-.60 |
| BERYLLIUM COPPER ALLOY 10 |
CDA C17500
|
CU 99.5 BE .20-.70 CO 2.4-2.7 |
| BERYLLIUM COPPER ALLOY 3 OR 14 |
CDA C17510
|
CU REM BE .20-.60 NI 1.4-2.2 |
| GILDING BRONZE 95/5 ALLOY |
CDA C21000
|
CU 94.0-96.0 ZN BAL |
| COMMERCIAL BRONZE 90/10 ALLOY |
CDA C22000
|
CU 89.0-91.0 ZN BAL |
| JEWELRY BRONZE 87/13 ALLOY |
CDA C22600
|
CU 86.0-89.0 ZN BAL |
| RED BRASS 85/15 ALLOY |
CDA C23000
|
CU 84.0-86.0 ZN BAL |
| LOW BRASS 80/20 ALLOY |
CDA C24000
|
CU 78.5-81.5 ZN BAL |
| CARTRIDGE BRASS 70/30 ALLOY |
CDA C26000
|
CU 68.5-71.5 ZN BAL |
| YELLOW BRASS 65/35 ALLOY |
CDA C27000
|
CU 63.0-68.5 ZN BAL |
| YELLOW BRASS 63/37 ALLOY |
CDA C27400
|
CU 61.0-64.0 ZN BAL |
| HIGH LEADED BRASS 62% |
CDA C35300
|
CU 60.0-63.0 PB 1.5-2.5 ZN BAL |
| FREE CUTTING BRASS LEADED 3% ALLOY |
CDA C36000
|
CU 60.0-63.0 PB 2.5-3.7 FE .35 ZN BAL |
| TIN BRASS |
CDA C43600
|
CU 80.0-83.0 SN .2-.5 ZN BAL |
| NICKEL ALLOY 200 |
N02200
|
NI 99.2 NOM |
| NICKEL ALLOY 205 |
N02205
|
NI 99.6 NOM |
| MONEL 400 |
N04400
|
NI 63.0-70.00 FE 2.5 MN 2.0 SI .5 CU BAL |
| 52 ALLOY CONTROLLED EXPANSION |
ALLOY 52
|
NI 52 FE BAL |
| KOVAR CONTROLLED EXPANSION ALLOY |
KOVAR
|
NI 29 CO 17 FE BAL |
| PHOSPHOR BRONZE 1.8% ALLOY |
CDA C50700
|
CU REM SN 1.5-2.0 P .30 |
| PHOSPHOR BRONZE GRADE A 5% ALLOY |
CDA C51000
|
CU REM SN 4.2-5.8 ZN .30 P .03-.35 |
| PHOSPHOR BRONZE GRADE C 8% ALLOY |
CDA C52100
|
CU REM SN 7.0-9.0 ZN .20 P .03-.35 |
| LEADED BRONZE B-2 |
CDA C54400
|
CU REM SN 3.5-4.5 PB 3.5-4.5 ZN 1.5-4.5 P .01-.50 |
| LOW SILICON BRONZE B |
CDA C65100
|
CU REM ZN 1.5 MN .7 SI .8-2.0 FE .8 |
| HIGH SILICON BRONZE A |
CDA C65500
|
CU REM FE .8 MN .5-1.3 NI .6 SI 2.8-3.8 ZN 1.5 |
| CUPRO NICKEL ALLOY 80/20 |
CDA C71000
|
CU REM FE 1.0 MN 1.0 NI 19.0-23.0 ZN 1.0 |
| CUPRO NICKEL ALLOY 70/30 |
CDA C71500
|
CU REM FE 4.0-1.0 MN 1.0 NI 29.0-33.0 ZN 1.0 |
| TIN-BEARING COPPER NICKEL |
CDA C72500
|
CU REM NI 8.5-10.5 SN 1.8-2.8 FE .6 ZN .5 MN .2 |
| NICKEL SILVER 72-18 |
CDA C73500
|
CU 70-73.5.0 MN .50 FE .25 NI 16.5-1950 ZN BAL |
| NICKEL SILVER 10% ALLOY |
CDA C74500
|
CU 63.5-68.5 MN .5 NI 9.0-11.0 ZN BAL |
| NICKEL SILVER 65-18 |
CDA C75200
|
CU 63.5-66.5 MN .5 FE .25 NI 16.5-19.5 ZN BAL |
| NICKEL SILVER 65-12 |
CDA C75700
|
CU 63.5-66.5 MN .5 FE .25 NI 11.0-13.0 ZN BAL |
| NICKEL SILVER 8% ALLOY |
CDA C76000
|
CU 60.0-63.0 MN .50 NI 7.0-9.0 ZN BAL |
| NICKEL SILVER 60-18 |
CDA C76400
|
CU 58.5-61.5 MN .5 FE .25 NI 16.5-19.5 ZN BAL |
| FINE SILVER |
N/A
|
AG 99.9 |
| STERLING SILVER |
N/A
|
AG 92.5 CU BAL |
| FINE SILVER |
N/A
|
AG 99.9 |
| STERLING SILVER |
N/A
|
AG 92.5 CU BAL |
| ALUMEL |
N/A
|
95% Ni, 2% Mn, 2% Al |
| CHROMEL |
N/A
|
80% Ni, 20% Cr |
Available Alloys for round, flat, square, shaped wire, cut to length, and pins.
All Mill Products conform to ASTM specifications as applicable.
|
WHEELER PACKAGING SPECS
|
||||
|
|
16"x3" masonite spool 40 lbs. average net |
 |
H
|
8" diameter coil Britecoat Silver Finish |
|
B
|
SH390K 12"x3.5"plastic spool 25 lbs. average net |
I
|
5"x4" plastic spool 5 lbs. average net |
|
|
C |
16"x6" plastic spool 80 lbs. maximum net |
J
|
12"x3.5" plastic spool 25 lbs. average net |
|
|
D |
16"x6" masonite spool 80 lbs. average net |
K
|
12" diameter coil Unplated Finish |
|
|
E |
5"x4" plastic spool 10 lbs. maximum net |
L
|
16" diameter coil Unplated Finish |
|
|
F |
8"x6" plastic spool 25 lbs. average net |
M
|
Large Barrel Fine Wire Spool | |
|
G
|
2" bobbin spooll 1/2 lb. maximum net |
N
|
Plastic Tube Straightened and Cut Pieces |
|
|
GENERAL SPECIFICATIONS FOR ALL ALLOYS
|
|
| Round Wire: | from .312" to .0010" diameter |
| Flat Wire: | 40 to 1 thickness to width ratio; thickness from .0015" to .250"; width not to exceed .750" |
| Square Edge Flat Wire: |
from .0080" to .750" thickness |
| Square Wire: | from .0080" square to .250" square |
| Shaped Wire: | per customer drawing, check with mill |
| Electroplated Finishes: |
gold, nickel, silver, copper, tin-lead 90/10, 93/7, 95/5, 100% tin whisker retardant |
ALL FLAT WIRE ALLOYS AVAILABLE WITH THICKNESS
RANGES FROM .012" TO .200"
AND WIDTH RANGES FROM .058" TO .750"
ALL FLAT WIRE ALLOYS AVAILABLE WITH EITHER
ROUNDED EDGES, OR WITH EDGE CONDITIONING
AND CONTROLLED CORNER RADIUS,
WHEELER INDUSTRIAL CORPORATION SUPER STRIP (tm)
Our Manufacturing
It has grown to become the leading redraw manufacturer of Beryllium Copper Fine Wires in the USA. Our manufacturing origins, which date to 1960, built our reputation on delivering precision specialty wire on time and to the highest quality standards.
We are particularly proud of our in-house Computerised Gold Plating Facilities and Silver-Plating Facilities which complement our existing high-speed tin and tin-lead lines.
Although we specialize in Beryllium Copper, our products encompass a broad spectrum of Alloys, including Brass, Bronze, Copper, Copper Alloys, Nickel, Nickel-Iron Expansion Alloys, and Speciality Cladded Combinations.
Round, flat, square, and shaped wires are custom produced both unplated and plated with gold, silver, palladium, palladium nickel, nickel, copper, tin, and tin-lead electroplated finishes. Wires can be manufactured with surfaces knurled with patterns and serrations or with rolled-in features.
RF Wire Technologies, LLC custom-produced specialty wires are found in a great number of widely assorted electromechanical, magnetic, and electronic applications. They are used in the manufacture of parts and components for automotive, cellular telecommunications, computers, and computer peripherals.
Milled Wire Products
We specialize in milled wire products such as: Round Wires, Super Strip, Flat Wires, Shaped Wires, Square Wire, Spring Wires, Hexagonal Wire and Precision Rods & Pins.
Our many alloys available include ELECTROLYTIC TOUGH PITCH COPPER, OXYGEN FREE COPPER, OXYGEN FREE SILVER BEARING COPPER, CADMIUM COPPER, MAGNESIUM COPPER, GILDING BRONZE, COMMERCIAL BRONZE, JEWELRY BRONZE, PHOSPHOR BRONZE, LOW SILICON BRONZE, HIGH SILICON BRONZE, RED BRASS, LOW BRASS, CARTRIDGE BRASS, YELLOW BRASS, TIN-BEARING COPPER NICKEL, NICKEL SILVER, and STERLING SILVER.
Our wire products are available on spools, reels, coils, cut to length, Acropak(R)*, and barrel packs. Our Flat Wire "Super Strip" (c) is available with edge conditioning, and can be supplied in traverse wound reels, pancake coils, or also cut to length.
